Permeability Performance and Lateral Load for Granular Backfill behind Abutments Permeability Performance and Lateral Load for Granular Backfill behind Abutments

Research Project

divider

Permeability Performance and Lateral Load for Granular Backfill behind Abutments

Researcher(s)

Principal investigators: Pavana Vennapusa
Center for Earthworks Engineering Research

Co-principal investigators:

Project status

Completed

Start date: 08/13/13
End date: 05/30/15

Publications

Report: May 2015, Permeability Performance and Lateral Load for Granular Backfill behind Abutments NA (*pdf)

Related publications: Permeability and Lateral Load of Granular Backfill Behind Abutments Tech Brief 0 *pdf September 2015

*To read pdf files, you may need to download the free Adobe Acrobat Reader.

Sponsor(s)/partner(s)

Sponsor(s): Wisconsin Department of Transportation
Wisconsin Highway Research Program

About the research

Abstract:

In bridge abutment design, the Wisconsin Department of Transportation (WisDOT) assumes the granular backfill material used behind bridge abutments as free-draining and no hydrostatic pressures are applied on the wall. This research investigated whether backfill materials meet the assumption of a freely-drained condition through a detailed laboratory and field study. In addition, the researchers investigated the viability of using recycled-asphalt pavement (RAP) and shingles (RAS) for granular backfill.

Laboratory testing involved characterizing the materials in terms of gradation/classification, erodibility, permeability, shear strength, and volume change (i.e., water-induced collapse). Laboratory tests revealed bulking moisture content for natural materials and collapse upon wetting. RAP and RAS materials exhibited collapse upon wetting and creep under constant loading.

The researchers performed scaled abutment model testing to assess pore pressure dissipation rates for the different materials and calibrate input parameters to predict drainage using fine element analysis (FEA). Abutment model testing indicated that addition of geocomposite vertical drain can substantially increase pore pressure dissipation rates and avoid material erosion.

Field testing involved in situ permeability, shear strength, and moisture content testing, and monitoring lateral earth pressures and pore pressures behind abutment walls at four bridges.

Results indicated that field conditions are more complex than the simple linear stress distribution typically assumed in the design for lateral earth pressures. Lateral earth pressures were greater than assumed in design over a majority of the monitoring period of this study.

Pore pressures behind an abutment wall were observed at one site following flooding. Predicted pore pressure dissipations using numerical analysis matched well with the measured values.

The researchers provided recommendations specific to the current WisDOT practice for abutment granular backfill design and construction as part of this project.

2711 S. Loop Drive, Suite 4700, Ames, Iowa 50010-8664
Phone: 515-294-9501 ~ Fax: 515-294-0467
The Bridge Engineering Center is administered by Iowa State University's Institute for Transportation.

Bridge Engineering Center logo

Timber Bridge Program Structural Health Monitoring Current Projects Completed Projects About BEC Staff Students Related Links

Iowa State University logo and link